This machine is usually used to extract the essential oil from flowers, plants, citrus, leaves, wood, resin, etc.
The machine consists of an extraction part, cooling part,
oil-water separation part, storage part, electric control part.
1. Extraction
part:
The raw material will be loaded into this tank for extraction, which by steam
distillation or water distillation to extract. And the extract tank has a material basket, the staff can put the material in the basket in the
extraction tank. When the extraction finished, the staff just needs to take out
the material basket to remove the material.
2. Cooling
part:
The steam passes through raw material and vaporizes
oil, mixtures of steam and oil vapors go into the condenser, after the cooling,
oil formed. The outer wall of the condenser is protected by stainless steel,
and the internal part is composed of multi-layer coils, so as to achieve better
cooling effect.
3. Oil water separation part:
When oil formed, it passes through the oil-water
separator to separate the pure oil and pure dew through the different density
of water and oil. We can see clearly the result of the separation.
4. Storage part:
When the oil and water are separated, the separated
dew is stored in the tank. It's easier to see where he's stored through a
mirror. And we can recycle it.
5. Electric control part:
This machine is controlled by the electric cabinet. If
you use the boiling way with the material, the electric cabinet will heat the heat
conduction oil first, then pass the temperature to the water and material to
produce the essential oil. This is more controllable and safer than direct
heating.
And if you need to know more, please check the following Youtube link.
没有评论:
发表评论